How to pair the Zepp Sensor to an iOS device via bluetooth
Pair your Zepp Sensor with your iOS or Android device
Connecting the Zepp Sensor to your Bluetooth enabled device is quick and easy. To begin, charge your Zepp Sensor for 2-3 hours to ensure a full charge. Next, turn on your sensor by pressing the side of the multi-function button and holding for four seconds. A running LED light will indicate that the device is on. If you are having troubles turning the device on.
To begin the pairing process, open your Settings Menu and select Bluetooth. If Bluetooth is not enabled, turn it on. If you are using an iOS device, it will automatically search for Bluetooth devices, and "Zepp" will appear in the list of devices available to pair if the sensor is powered on and nearby. If you are using an Android device, you will need to select "Scan" or “Search for Devices” to locate the Zepp sensor. This may take up to 15 seconds. Once found, tap on "Zepp". If prompted to enter a PIN to successfully pair, simply press "OK" or "Accept" and continue. No PIN is required to pair the Zepp Sensor. It will take a few moments for the sensor to pair with the device. When paired, it will show Zepp “Connected”.
NOTE: Bluetooth technology only allows for your Zepp sensor to be paired to one mobile device at a time. If you are using multiple devices, make sure that the sensor is properly paired to the desired mobile device, and that Bluetooth is turned off on all other devices.
Connect your Zepp Sensor within the Zepp app
Once the sensor is paired in your Bluetooth settings, you can connect it in the app. To do so, enter the app and go to your Profile screen. Once you are at the Profile screen, tap the "gear" icon in the top left corner to go to the App Settings screen. From here, select "My Sensor." Once on the My Sensor screen, make sure the sensor is powered on and in range, and then tap the Manage Sensor icon in the top right of the My Sensor screen.
Once on the Manage Sensor screen, you will see a list of any nearby Zepp sensors, with your sensor in the list. Tap on the name of the sensor in the list on your mobile device's screen, and the sensor will connect in the app.
Once the sensor is connected in the app, the sensor icon at the top of the swing screen will be lit yellow instead of grey (as shown below), indicating the sensor is ready to capture swings. From here you can swing away to start recording swings. You can also tap the sensor icon at the top of the screen to return to the My Sensor menu at any time.